Falcon Ethernet

From MGH Designs wiki
Revision as of 21:48, 18 September 2016 by Martin Hodge (talk | contribs)
Jump to navigation Jump to search
Click image to enlarge
Click image to enlarge
This image shows which parts (J19, L86-L93, and L95) will need to be de-soldered in order to make room for the adapter. Also be sure to remove the small jumper from the two pins on J20, the adapter makes this connection on-board.
Click image to enlarge
Click image to enlarge
There is a narrow lip that will need to be folded inward to make clearance for the adapter. A ordinary pair of pliers will accomplish this easily. (Or you may elect to grind this lip off completely with a rotary tool.)
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge