Grove

From MGH Designs wiki

Revision as of 20:39, 18 September 2016 by Martin Hodge (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Seeed Studio Grove System

Connecting the Base Shield to the ASC

Connect the Base Shield to the Propeller ASC as shown in the photos. (Shown with optional RGB adapter between.)

Connecting twigs to the base shield will follow the same procedures as with an Arduino. See the Seeed Studio wiki for info.

Use the SPIN / PASM driver for MCP3208 Analog to Digital converter to use analog twigs such as the temperature and rotary twigs. (ADC 6 & 7 is not available)

Twig compatibility chart

^ Twig ^Bypass Jumper ^Direction ^Code Examples ^ ^ Twig ^Bypass Jumper ^Direction ^Code Examples ^ | Rotary\\ Template:Gbrot.jpg?nolink&100x75 | Open | INPUT | Code | | Button\\ Template:Bgpushb1.jpg?nolink&100x75 | Open | INPUT | Code | | Relay\\ Template:P3222472.jpg?nolink&100x75 | Either | OUTPUT | Code | | Tilt\\ Template:Gbtlt.jpg?nolink&100x75 | Open | INPUT | Code | | LED\\ Template:P2100717.jpg?nolink&100x75 | Closed | OUTPUT | Code | | Temperature\\ Template:Bgtemp1.jpg?nolink&100x75 | Open | INPUT | Code | | Buzzer\\ Template:Gbbuz.jpg?nolink&100x75 | Closed | OUTPUT | Code | | LCD\\ Template:Seriallcdv10sa 03.jpg?nolink&100x75 | ???? | OUTPUT | Code |

Retrieved from "https://1mgh.com/w/index.php?title=Grove&oldid=69"