Difference between revisions of "Falcon Ethernet"
From MGH Designs wiki
Martin Hodge (Talk | contribs) (Created page with "File:removed_parts.jpg This image shows which parts (J19, L86-L93, and L95) will need to be de-soldered in order to make room for the adapter. Also be sure to remove the...") |
(No difference)
|
Revision as of 21:25, 18 September 2016
This image shows which parts (J19, L86-L93, and L95) will need to be de-soldered in order to make room for the adapter. Also be sure to remove the small jumper from the two pins on J20, the adapter makes this connection on-board.
There is a narrow lip that will need to be folded inward to make clearance for the adapter. A ordinary pair of pliers will accomplish this easily. (Or you may elect to grind this lip off completely with a rotary tool.)
