Falcon Ethernet

From MGH Designs wiki
Revision as of 21:25, 18 September 2016 by Martin Hodge (Talk | contribs) (Created page with "File:removed_parts.jpg This image shows which parts (J19, L86-L93, and L95) will need to be de-soldered in order to make room for the adapter. Also be sure to remove the...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

removed_parts.jpg

This image shows which parts (J19, L86-L93, and L95) will need to be de-soldered in order to make room for the adapter. Also be sure to remove the small jumper from the two pins on J20, the adapter makes this connection on-board.


folded_shield.jpg

There is a narrow lip that will need to be folded inward to make clearance for the adapter. A ordinary pair of pliers will accomplish this easily. (Or you may elect to grind this lip off completely with a rotary tool.)