Difference between revisions of "Falcon Ethernet"

Revision as of 21:48, 18 September 2016

	This image shows which parts (J19, L86-L93, and L95) will need to be de-soldered in order to make room for the adapter. Also be sure to remove the small jumper from the two pins on J20, the adapter makes this connection on-board.
	There is a narrow lip that will need to be folded inward to make clearance for the adapter. A ordinary pair of pliers will accomplish this easily. (Or you may elect to grind this lip off completely with a rotary tool.)

@@ Line 1: / Line 1: @@
-[[File:removed_parts.jpg|removed_parts.jpg]]
+{|
+|- style="vertical-align:top;"
-This image shows which parts (J19, L86-L93, and L95) will need to be de-soldered in order to make room for the adapter. Also be sure to remove the small jumper from the two pins on J20, the adapter makes this connection on-board.
+|[[File:removed_parts.jpg|none|300px|Click image to enlarge]]
+|This image shows which parts (J19, L86-L93, and L95) will need to be de-soldered in order to make room for the adapter. Also be sure to remove the small jumper from the two pins on J20, the adapter makes this connection on-board.
-----
+|- style="vertical-align:top;"
+|[[File:folded_shield.jpg|none|300px|Click image to enlarge]]
-[[File:folded_shield.jpg|folded_shield.jpg]]
+|There is a narrow lip that will need to be folded inward to make clearance for the adapter. A ordinary pair of pliers will accomplish this easily. (Or you may elect to grind this lip off completely with a rotary tool.)
+|-
-There is a narrow lip that will need to be folded inward to make clearance for the adapter. A ordinary pair of pliers will accomplish this easily. (Or you may elect to grind this lip off completely with a rotary tool.)
+|[[File:DSC_0129s.jpg|none|300px|Click image to enlarge]]
+|-
+|[[File:DSC_0136s.jpg|none|300px|Click image to enlarge]]
+|-
+|[[File:DSC_0137s.JPG|none|300px|Click image to enlarge]]
+|-
+|[[File:DSC_0186s.jpg|none|300px|Click image to enlarge]]
+|}